Repair Procedures: Installation

NOTE:

Install the control cable (B) and clip (A) on the bracket.

Fig 1: Locate Control Cable And Clip
Courtesy of KIA MOTORS AMERICA, INC.
Install the washer (B) and pin (A).

Fig 2: Install Control Cable Washer And Pin
Courtesy of KIA MOTORS AMERICA, INC.
Tighten the nut (B) after install the retainer (A).
Tightening torque:

11.8 ~ 14.7 N.m (1.2 ~ 1.5 kgf.m, 8.7 ~ 10.8 lb-ft)

Fig 3: Tighten Retainer Nut
Courtesy of KIA MOTORS AMERICA, INC.
Install the cable socket (A) on the shift lever assembly.

Fig 4: Locate Cable Socket Of Shift Lever Assembly
Courtesy of KIA MOTORS AMERICA, INC.
Install the shift cable (B) and clip (A).

Fig 5: Install Shift Cable And Clip
Courtesy of KIA MOTORS AMERICA, INC.
Shift lever to "3rd".
Install the snap pin (A) after install the select cable (B).
CAUTION:
- Install the snap pin (A) after adjust the select cable (B).
  (Refer to Control Cable - "ADJUSTMENT ")
Fig 6: Install Select Cable Snap Pin
Courtesy of KIA MOTORS AMERICA, INC.
Install the floor console assembly.
(Refer to Body - "FLOOR CONSOLE ")
Install the battery and battery tray.
(Refer to Engine Electrical System - "BATTERY ")
Install the air cleaner assembly.
(Refer to Engine Electrical System - "BATTERY ")