Repair Procedures: Removal

Remove the floor console assembly.
(Refer to Body - "FLOOR CONSOLE ")
Remove the select cable (B) by removing the snap pin (A).

Fig 1: Remove Select Cable Snap Pin
Courtesy of KIA MOTORS AMERICA, INC.
Remove the shift cable (B) after removing the clip (A).

Fig 2: Remove Shift Cable Clip
Courtesy of KIA MOTORS AMERICA, INC.
Remove the cable socket (A) from lever assembly after pulling the cable socket clip in the direction of the arrow.

Fig 3: Remove Cable Socket From Lever Assembly
Courtesy of KIA MOTORS AMERICA, INC.
Remove the retainer (A) after loosen the nut (B).

Fig 4: Loosen Retainer Nut
Courtesy of KIA MOTORS AMERICA, INC.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "AIR CLEANER ")
Remove the battery and battery tray.
(Refer to Engine Electrical System - "BATTERY ")
Remove the shift & select cable.
1. Remove the pin (A) and washer (B).
2. Make unlock clip (C) and then remove the shift & select cable and the clip (C) from the bracket.
Fig 5: Remove Shift And Select Cable From Bracket
Courtesy of KIA MOTORS AMERICA, INC.
NOTE:
- Do not reuse the clip (C).
Remove the shift cable at cabin room.