LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> Forte5 EX >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> Rail Pressure Sensor (RPS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Release the residual pressure in fuel line (Refer to the Fuel Delivery System - Repair Procedures - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ").
    CAUTION: When removing the fuel pump relay, a Diagnostic Trouble Code (DTC) may occur. Delete the code with the GDS after completion of "Release Residual Pressure in Fuel Line" work.
  3. Remove the intake manifold (Refer to "Intake And Exhaust System" in EM group).
  4. Remove the injector foam (A).
    Fig 1: Locate Injector Foam
    G11796954Courtesy of KIA MOTORS AMERICA, INC.
  5. Disconnect the rail pressure sensor connector (A), and then remove the sensor (B) from the delivery pipe.
Fig 2: Locate Rail Pressure Sensor And Connector
G11796955Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals