De-normalization (Memory reset)
Under conditions below, ECU turns to de-normalized status. After de-normalized, auto up and safety function shall not be operated. In order to make these function active again, ECU should go through the normalization process.
- De-normalized conditions:
- Continuous 15 times reverses
- Power off during motor operation
- Driver side door opened and window glass is at the bottom (hard stop position) with IGN on, IGN off → within 2 sec, IGN on → Press Manual Down switch 3 times within 5 sec → De-normalization
| Door and Glass status | IGN status | Input time | IGN status | Switch input status | Switch input times | Normalization status | ||
|---|---|---|---|---|---|---|---|---|
| Re-input time | IGN status | Switch input | ||||||
| Driver side door opened, Window glass is bottom with IGN on (Hard stop) | IGN Off | T≥2 sec | IGN On | T≥5 sec | IGN On | Press and release Manual down switch | 3 times | De-normalized |