Signal Circuit Inspection
- Connect the Inhibitor switch connector.
- Ignition KEY "ON" & Engine "OFF".
- Measure voltages between each terminal and chassis ground during shift lever changed "P, R, N, D".
Specification: See below "Signal Code Table"
Signal Code Table
| P | P-R | R | R-N | N | N-D | D | |
|---|---|---|---|---|---|---|---|
| Signal "1" | 12V | 12V | 0 | 0 | 0 | 0 | 0 |
| Signal "2" | 0 | 12V | 12V | 12V | 0 | 0 | 0 |
| Signal "3" | 0 | 0 | 0 | 12V | 12V | 12V | 0 |
| Signal "4" | 0 | 0 | 0 | 0 | 0 | 12V | 12V |