Repair Procedures: Installation
NOTE:
- Install the component with the specified torques.
- Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
NOTE:
- Apply the engine oil to the O-ring.
NOTE:
- Insert the sensor in the installation hole and be careful not to damage when installation.
NOTE:
- Be careful not to damage the sensor housing and the connector.
- Be careful not to damage the O-ring.
- Install in the reverse order of removal.
Camshaft Position Sensor Mounting Bolt:
6.9 ~ 9.8N.m (0.7 ~ 1.0kgf.m, 5.1 ~ 7.2lb-ft)