LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> K900 V6 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.8L >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Adjustment
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Adjustment

ETC Module Learning Procedure 

Be sure to perform the ETC module learning procedure when replacing or reinstalling the ETC module.

  1. Wait for 1 minute with the Ignition Switch ON.
  2. Start the engine and hold the idle status for 15 minutes.
  3. Waif for 1 minute with the Ignition Switch OFF.
  4. Restart the engine, check that the idle speed is stable.
NOTE: If not performing the ETC module learning procedure after replacing or reinstalling, MIL illumination with DTCs might occur.
scientia non olet · About LEMON Manuals