LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> K900 V6 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.8L >> Engine Coolant Temperature Sensor (ECTS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the air cleaner assembly

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Disconnect the engine coolant temperature sensor connector (A).
  4. Remove the spring clip (B), and then pull the sensor from the water temperature control assembly.
    CAUTION:
    • Note that engine coolant may flow out from the water temperature control assembly when removing the sensor.
    Fig 1: Locating Engine Coolant Temperature Sensor Connector And Spring Clip
    G11804951Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals