Repair Procedures: Removal

Open the trunk.
Turn the Ignition Switch OFF and disconnect the battery negative (-) cable.
Remove the floor mat in the trunk (Refer to Body - "TRUNK TRIM ").
Remove the Partition board trim (A).

Fig 1: Locating Partition Board Trim
Courtesy of KIA MOTORS AMERICA, INC.
Remove the service cover (A) in the trunk.

Fig 2: Locating Service Cover
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the fuel tank pressure sensor connector (A).
Remove the fuel tank pressure sensor after removing the mounting bolt.

Fig 3: Locating Fuel Tank Pressure Sensor Connector

Courtesy of KIA MOTORS AMERICA, INC.