Repair Procedures: Removal

1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
2. Disconnect the variable intake solenoid valve connector (A).
3. Disconnect the vacuum hoses (B) from the valve.
4. Remove the mounting nut (C), and then remove the valve from the surge tank.

[VIS #1] 

Fig 1: Locating Variable Intake Solenoid Valve Connector, Vacuum Hoses And Valve Mounting Nut (VIS 1)

Courtesy of KIA MOTORS AMERICA, INC.

[VIS #2] 

Fig 2: Locating Variable Intake Solenoid Valve Connector, Vacuum Hoses And Valve Mounting Nut (VIS 2)

Courtesy of KIA MOTORS AMERICA, INC.