LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> K900 V8 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 5.0L >> Heated Oxygen Sensor (HO2S) >> Repair Procedures >> Removal >> Bank 1/Sensor 1
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Bank 1/Sensor 1

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the heated oxygen sensor connector.
  3. Lift the vehicle.
  4. Remove the rear under cover (A).
    Fig 1: Removing Rear Under Cover
    G11802907Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the RH front muffler.

    (Refer to Engine Mechanical System - "MUFFLER ")

  6. Remove the heater protector (B) from the catalytic converter after removing the bolt (A).
  7. Remove the heated oxygen sensor (C) with the spanner after lifting the heater protector (B).
Fig 2: Removing Heater Protector From Catalytic Converter
G11802908Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals