LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> Sedona EX >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Barometric Pressure Sensor (BPS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the barometric pressure sensor connector (A).
  3. Remove the mounting bolt (B) and then remove the sensor from the air cleaner assembly.
Fig 1: Locating Barometric Pressure Sensor Connector And Mounting Bolts
G11856637Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals