Repair Procedures: Removal

[Bank 1] 

1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
2. Remove the intake manifold.

   (Refer to Engine Mechanical System - "INTAKE MANIFOLD ")

3. Remove the delivery pipe.

   (Refer to Fuel Delivery System - "DELIVERY PIPE ")

4. Remove the mounting bolt (A), and then remove the sensor from the cylinder block.

Fig 1: Locating Mounting Bolt - Bank 1

Courtesy of KIA MOTORS AMERICA, INC.

[Bank 2] 

1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
2. Remove the intake manifold.

   (Refer to Engine Mechanical System - "INTAKE MANIFOLD ")

3. Remove the delivery pipe.

   (Refer to Fuel Delivery System - "DELIVERY PIPE ")

4. Remove the mounting bolt (A), and then remove the sensor from the cylinder block.

Fig 2: Locating Mounting Bolt - Bank 2

Courtesy of KIA MOTORS AMERICA, INC.