Repair Procedures: Installation
NOTE:
- Install the component to the specified torques.
- Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
- Be careful not to let foreign material to flow into the valve.
- Install in the reverse order of removal.
Variable Intake Solenoid Valve 1 Mounting Nut:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
Variable Intake Solenoid Valve 2 Mounting Bolt:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)