Repair Procedures: Removal

[Valve 1]

1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
2. Disconnect the variable intake solenoid valve connector (A).
3. Disconnect the vacuum hoses (B) from the valve.
4. Remove the mounting nut (C), and then remove the valve from surge tank.
   Fig 1: Locating Solenoid Valve Connector, Vacuum Hoses And Mounting Nut (Valve - 1)

   Courtesy of KIA MOTORS AMERICA, INC.

[Valve 2] 

1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
2. Disconnect the variable intake solenoid valve connector (A).
3. Disconnect the vacuum hoses (B) from the valve.
4. Remove the mounting nut (C), and then remove the valve from surge tank.
   Fig 2: Locating Solenoid Valve Connector, Vacuum Hoses And Mounting Nut (Valve - 2)

   Courtesy of KIA MOTORS AMERICA, INC.