LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> Sedona EX >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition System >> Spark Plug >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

NOTE:
  • Be careful that no contaminant enters into spark plug holes.
  • Use the spark plug wrench (A) to prevent the damage on the spark plug.
Fig 1: Removing Spark Plug Using Spark Plug Wrench
G11856472Courtesy of KIA MOTORS AMERICA, INC.
NOTE:
  • When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).
Fig 2: Removing Ignition Coil Connector
G11856473Courtesy of KIA MOTORS AMERICA, INC.

Ignition Coil (Cylinder #1) [Bank 1] 

  1. Remove the Surge Tank.

    (Refer to Engine Mechanical System - "SURGE TANK ")

  2. Disconnect the Ignition Coil connector (A).
  3. Remove the Ignition Coil after loosening the mounting bolt (B).
    Fig 3: Disconnecting Ignition Coil Connector (Cylinder 1)
    G11856474Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the Spark Plug.

Ignition Coil (Cylinder #2) [Bank 2] 

  1. Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Terminal.
  2. Disconnect the Ignition Coil connector (A).
  3. Remove the Ignition Coil after loosening the mounting bolt (B).
    Fig 4: Disconnecting Ignition Coil Connector (Cylinder 2)
    G11856475Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the Spark Plug.

Ignition Coil (Cylinder #3) [Bank 1] 

  1. Remove the surge tank.

    (Refer to Engine Mechanical System - "SURGE TANK ")

  2. Disconnect the Ignition Coil connector (A).
  3. Remove the Ignition Coil after loosening the mounting bolt (B).
    Fig 5: Disconnecting Ignition Coil Connector (Cylinder 3)
    G11856476Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the Spark Plug.

Ignition Coil (Cylinder #4) [Bank 2] 

  1. Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Terminal.
  2. Disconnect the Ignition coil connector (A).
  3. Remove the Ignition Coil after loosening the mounting bolt (B).
    Fig 6: Disconnecting Ignition Coil Connector (Cylinder 4)
    G11856477Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the spark plug.

Ignition Coil (Cylinder #5) [Bank 1] 

  1. Remove the surge tank.

    (Refer to Engine Mechanical System - "SURGE TANK ")

  2. Disconnect the Ignition coil connector (A).
  3. Remove the ignition coil after loosening the mounting bolt (B).
    Fig 7: Disconnecting Ignition Coil Connector (Cylinder 5)
    G11856478Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the spark plug.

Ignition Coil (Cylinder #6) [Bank 2] 

  1. Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Terminal.
  2. Disconnect the Ignition Coil connector (A).
  3. Remove the Ignition Coil after loosening the mounting bolt (B).
    Fig 8: Disconnecting Ignition Coil Connector (Cylinder 6)
    G11856479Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the Spark Plug.
scientia non olet · About LEMON Manuals