Repair Procedures: Removal

Place the shift lever into the "N" position.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "BATTERY ")
Disconnect the inhibitor switch connector (A) and loosen the shift cable mounting nut (B).

Fig 1: Locating Inhibitor Switch Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the Manual Control Lever (B) and the washer after removing a nut (A).

Fig 2: Locating Manual Control Lever
Courtesy of KIA MOTORS AMERICA, INC.
Remove the inhibitor switch (A) after loosening the bolts.

Fig 3: Locating Inhibitor Switch Bolts

Courtesy of KIA MOTORS AMERICA, INC.