Repair Procedures: Installation
NOTE:
- Install the component to the specified torques.
- Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
NOTE:
- Apply the engine oil to the valve O-ring.
NOTE:
- Accurately distinguish the color of the valve and harness connectors in bank 1 and 2 when installing, otherwise the engine will operate abnormally (Refer to the table below).
| Items | Component Side | Harness Side |
|---|---|---|
| Bank 1 (RH) | Grey | |
| Bank 2 (LH) | Black | |
- Install in the reverse order of removal.
CVVT Oil Control Valve Mounting Bolt:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)