Repair Procedures: Installation
NOTE:
- Install the component to the specified torques.
- Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
- Apply the sealant (LOCTITE FED546 or equivalent) to the sensor.
- Insert the sensor in the installation hole and be careful not to damage sensor when installing.
- Install in the reverse order of removal.
CVVT Oil Temperature Sensor
34.3 ~ 41.1 N.m (3.5 ~ 4.5 kgf.m, 25.3 ~ 32.5 lb-ft)