Repair Procedures: Installation
NOTE:
- Install the component to the specified torques.
- Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
- Be careful not to apply oil or lubricant to the end of the hoses when connecting the PCSV hose.
- Be careful not to let foreign material to flow into the valve.
- Install in the reverse order of removal.
Purge Control Solenoid Valve Bracket Mounting Bolt:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m 7.2 ~ 8.7 lb-ft)