Repair Procedures: Removal

Ignition Coil (Cylinder #1) [Bank 1] 

1. Remove the surge tank.

   (Refer to Engine Mechanical System - "SURGE TANK ")

2. Disconnect the Ignition Coil connector (A).
3. Remove the Ignition Coil after loosening the mounting bolt (B).

Ignition Coil (Cylinder #2) [Bank 2] 

1. Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Terminal.
2. Disconnect the Ignition coil connector (A).
3. Remove the ignition coil after loosening the mounting bolt (B).

Ignition Coil (Cylinder #3) [Bank 1] 

1. Remove the surge tank.

   (Refer to Engine Mechanical System - "SURGE TANK ")

2. Disconnect the Ignition Coil connector (A).
3. Remove the ignition coil after loosening the mounting bolt (B).

Ignition Coil (Cylinder #4) [Bank 2] 

1. Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Terminal.
2. Disconnect the Ignition coil connector (A).
3. Remove the ignition coil after loosening the mounting bolt (B).

Ignition Coil (Cylinder #5) [Bank 1] 

1. Remove the surge tank.

   (Refer to Engine Mechanical System - "SURGE TANK ")

2. Disconnect the Ignition Coil connector (A).
3. Remove the Ignition Coil after loosening the mounting bolt (B).

Ignition Coil (Cylinder #6) [Bank 2] 

1. Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Terminal.
2. Disconnect the Ignition Coil connector (A).
3. Remove the ignition Coil after loosening the mounting bolt (B).
   Fig 6: Disconnecting Ignition Coil Connector (Cylinder 6)

   Courtesy of KIA MOTORS AMERICA, INC.
   NOTE:

   • When removing the Ignition Coil Connector, pull the Lock Pin (A) and push the Clip (B).
   Fig 7: Removing Ignition Coil Connector

   Courtesy of KIA MOTORS AMERICA, INC.