Repair Procedure: Removal

[Bank 1/Sensor 1] 

1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
2. Disconnect the connector (A), and then remove the sensor (B).

Fig 1: Locate Connector (Bank 1/Sensor 1)

Courtesy of KIA MOTORS AMERICA, INC.

Fig 2: Locate Sensor (Bank 1/Sensor 1)

Courtesy of KIA MOTORS AMERICA, INC.

[Bank 1/Sensor 2] 

1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
2. Disconnect the connector (A), and then remove the sensor (B).

Fig 3: Locate Connector (Bank 1/Sensor 2)

Courtesy of KIA MOTORS AMERICA, INC.

Fig 4: Locate Sensor (Bank 1/Sensor 2)

Courtesy of KIA MOTORS AMERICA, INC.