Repair Procedures: Installation

Check that the shift lever is placed in the "N" position.
Install the shift cable retainer (A).
Tightening torque:

11.8 - 14.7 N.m (1.2 - 1.5 kgf.m, 8.7 - 10.8 lb.ft)

Courtesy of
Install the shift cable (A).

Courtesy of
Install the floor console assembly.
(Refer to "FLOOR CONSOLE .")
Install the knob (A) by pressing it in the direction of arrow after installing the boots to the console upper cover.

Courtesy of
Install the shift cable (A) to bracket and then lightly tighten the nut (B).

Courtesy of

NOTE: The existing shift cable clip (A) must be replaced with new one. (Do not reuse it.)

Courtesy of
Tighten the nut (A) to the specified torque after removing free play by pushing the shift cable in the direction of the arrow.

Courtesy of
Install the battery and battery tray.
(Refer to "BATTERY .")
Install the air cleaner assembly.
(Refer to "AIR CLEANER .")