LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Switch Assembly >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel.

    (Refer to "CRASH PAD LOWER PANEL .")

  3. Remove the steering column upper and lower shrouds.

    (Refer to "STEERING COLUMN SHROUD PANEL .")

  4. Remove the wiper switch.

    (Refer to "MULTIFUNCTION SWITCH .")

  5. Remove the ignition switch after loosening disconnecting the ignition switch 6P connector (A).
    G11952110Courtesy of
  6. Remove the ignition switch assembly (A) after loosening the mounting bolts.
    G11952111Courtesy of
  7. If it is necessary to remove the key lock cylinder (A), it is in the order as below.
    1. Disconnect the key warning/immobilizer connector (A)
      G11952112Courtesy of
    2. Turn the key to ACC (A).
      G11952113Courtesy of
    3. Remove the key lock cylinder (B) while pushing the removal/installation button under the key cylinder (A).
    G11952114Courtesy of
    G11952115Courtesy of
scientia non olet · About LEMON Manuals