Initializing Method Of The Safety Power Window

When the battery power is removed for over 5 minutes, safety power window switch need the initializing.

1. Power window operation before initializing
   • Manual-Up/Down function is available
   • Auto-Up function is not available

     (When holding the auto-up/down switch, window is operated as a manual-up/down.)

2. Initializing method
   • Close the window in window open position, and holding the switch in window full close position over the 0.2 second.
   • (If start the closing the window in window full close position, initializing could be failed.)
3. If initialize the safety power window in jamming status, could occur below conditions.
   • Safety function is not available

1. If the window moved by compulsion and motor have a problem, power window switch could be entering the fail safe mode for user's safety.
2. Power window operation in fail mode
   • Auto/Manual-Down function is available
   • Auto/Manual-Up function is not available

     (When auto/manual-up is operated, window is rising 20 mm and is stopped the moving.)