Repair Procedures: Installation
NOTE:
- Install the component with the specified torques.
- Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
NOTE:
- Apply the engine oil to the O-ring.
NOTE:
- Insert the sensor in the installation hole and be careful not to damage.
NOTE:
- Be careful not to damage the sensor housing and the connector.
- Be careful not to damage the O-ring.
- Install in the reverse order of removal.
Camshaft position sensor mounting bolt:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)