Repair Procedures: Replacement

Remove the front seat assembly.
(Refer to "FRONT SEAT ASSEMBLY .")
Disconnect the front seat belt buckle connector wiring (A).

Courtesy of
After loosening the mounting bolt, then remove the front seat belt buckle (A).
Tightening torque:

39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

Courtesy of
Install in the reverse order of removal.
Information
- Make sure the connector is plugged in properly.
- Replace any damaged clips.