Repair Procedures: Removal

Remove the floor console assembly.
(Refer to "FLOOR CONSOLE .")
Remove the rear heating joint duct (A).

Courtesy of
Remove the shift cable (A) from the shift lever assembly.

Courtesy of
Remove the retainer (A) by loosening the nuts (B).
Tightening torque:

11.8 ~ 14.7 N.m (1.2 ~1.5 kgf.m, 8.7 ~ 10.8 lb-ft)

Courtesy of
Remove the air cleaner assembly and air duct.
(Refer to "AIR CLEANER .")
Battery and battery tray.
(Refer to "BATTERY .")
Remove the shift cable from the transaxle.
1. Remove the nut (C) from the manual control lever.
  Tightening torque:
  
  9.8 ~ 13.7 N.m (1.0 ~1.4 kgf.m, 7.2 ~ 10.8 lb-ft)
2. Remove the cable (B) from the bracket (A).
Courtesy of
Remove the shift cable by pulling it toward the interior.