Repair Procedures: Removal

Remove the shift lever knob & boots assembly (A) by Pulling in the upside.

Courtesy of
Remove the floor console assembly.
(Refer to "FLOOR CONSOLE .")
Remove the rear heating joint duct (A).

Courtesy of
Disconnect the shift lever main connector.

Courtesy of
Remove the wiring (A) from the shift lever assembly.

Courtesy of
Remove the shift cable (A) from the shift lever assembly.

Courtesy of
Remove the shift lever assembly (A) by removing the bolts.
Tightening torque:

8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

Courtesy of