Repair Procedures: Removal
- Shift lever to "4th" gear position.
- Rotating counter-clockwise shift lever knob (A).
- Remove the floor console assembly.
(Refer to "FLOOR CONSOLE .")
- Remove the rear heating joint duct (A).
- Remove the bracket (A).
- Remove the select cable (B) after removing the snap pin (A).
- Remove the cable socket (C) from lever assembly after pulling in the direction of the arrow.
- Remove the shift cable (B) after removing the clip (A).
- Remove the cable socket (A) from lever assembly after pulling in the direction of the arrow.
- Remove the retainer (A) after loosen the nut (B).
- Remove the air cleaner assembly.
(Refer to "AIR CLEANER .")
- Remove the battery and battery tray.
(Refer to "BATTERY .")
- Remove the shift & select cable.
- Remove the pin (A) and washer (B).
- Make unlock clip (C) and then remove the shift & select cable and the clip (C) from the bracket.