Repair Procedures: Removal

Rotating counter-clockwise shift lever knob (A).

Courtesy of
Remove the floor console assembly.
(Refer to "FLOOR CONSOLE .")
Remove the rear heating joint duct (A).

Courtesy of
Remove the bracket (A).

Courtesy of
Remove the select cable (B) after removing the snap pin (A).
Remove the cable socket (C) from lever assembly after pulling in the direction of the arrow.

Courtesy of
Remove the shift cable (B) after removing the clip (A).

Courtesy of
Remove the cable socket (A) from lever assembly after pulling in the direction of the arrow.

Courtesy of
Remove the shift lever assembly (B) by removing the bolts (A).
Tightening torque:

8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

Courtesy of