Repair Procedures: Inspection
WARNING: This page is about a different car, the 2017 Kia Niro. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch OFF.
- Disconnect the CCV connector.
- Measure resistance between the CCV terminal 1 and 2.
- Check that the resistance is within the specification.
Specification: Refer to "SPECIFICATION "
- Disconnect the vapor hose connected with the canister from the CCV.
- Connect a vacuum pump to the nipple.
- Ground the CCV control line and apply battery voltage to the CCV power supply line.
- Apply vacuum and check the valve operation.
Specification: Vacuum maintained