LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2017 >> Forte EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 172 (Engine Control System) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Adjustment >> ETC Module Learning Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ETC Module Learning Procedure

WARNING: This page is about a different car, the 2017 Kia Niro. However, it is still accessible from the selected car via links, so may be relevant.

Be sure to perform the ETC module learning procedure when replacing or re-installing the ETC module.

  1. Wait for one minute with the ignition switched "ON".
  2. Start and keep the engine idle for 15 minutes.
  3. Wait for one minute with the ignition switched "OFF".
  4. Restart the engine, and check that the idle speed is stable.
    NOTE: If the ETC module learning procedure is not performed after replacing or reinstalling the ETC module, MIL illumination with DTCs may occur.
scientia non olet · About LEMON Manuals