Repair Procedures: Installation
WARNING: This page is about a different car, the 2017 Kia Niro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Install the component to the specified torque.
- Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
- Apply the engine coolant to the O-ring.
- Insert the sensor in the installation hole and be careful not to damage it.
- Install in the reverse order of removal.
- Replenish the Engine Coolant.
(Refer to Engine Mechanical System - "COOLANT ")