Repair Procedures: Inspection
WARNING: This page is about a different car, the 2017 Kia Niro. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the KDS/GDS on the Data Link Connector (DLC).
- Measure the output voltage of the RPS during idle at various engine speeds.
RAIL PRESSURE SENSOR (RPS) VOLTAGE SPECIFICATION
| Pressure | Output Voltage (V) [V-ref = 5V] | |
|---|---|---|
| Bar | [MPa (kgf/cm2 , psi)] | |
| 0 | 0 (0, 0) | 0.5 |
| 140 | 14 (142, 2031) | 2.5 |
| 280 | 28 (286, 4061) | 4.5 |