Repair Procedures: Inspection
- Connect the KDS/GDS on the Data Link Connector (DLC).
- Turn the ignition switch ON.
- Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.
| Accelerator Position |
Output Voltage (V) |
| APS1 |
APS2 |
| C.T |
0.7 ~ 0.8 |
0.29 ~ 0.46 |
| W.O.T |
3.85 ~ 4.35 |
1.93 ~ 2.18 |