Repair Procedures: Inspection
- Connect the KDS/GDS on the Data Link Connector (DLC).
- Switch "ON" the ignition.
- Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.
ACCELERATOR POSITION SENSOR (APS) SPECIFICATION
| Accelerator Position | Output Voltage (V) [V-ref = 5V] | |
|---|---|---|
| APS1 | APS2 | |
| C.T | 0.7 - 0.8 | 0.33 - 0.43 |
| W.O.T | 3.98 - 4.22 | 1.98 - 2.13 |