CAN Resistance Inspection

INSPECTION PART - ECM SYSTEM CONNECTOR INSPECTION

Inspection Part: CAN Resistance Inspection
Inspection Condition	(+) Probe		(-) Probe		Specification
Inspection Condition	Connector	Terminal	Connector	Terminal	Specification
Ignition "OFF". Disconnect the Battery (-) Cable. Wait for approx. 4 mins.	ECM Connector	55 (P-CAN High)	ECM Connector	77 (P-CAN Low)	Approx. 60Ω

Good	Go to "CAN Line Inspection " procedure.
No Good	Repair as necessary and then go to "Verification Of Repair " procedure.