Repair Procedures: Inspection
- Connect the KDS/GDS on the Data Link Connector (DLC).
- Turn the ignition switch ON.
- Measure the output voltage of the APS 1 and 2 at C. T and W.O.T.
| Accelerator Position |
Output Voltage (V) [Vref = 5V] |
| APS1 |
APS2 |
| C. T |
0.7 - 0.8 |
0.33 - 0.43 |
| W.O.T |
3.98 - 4.35 |
1.93 - 2.18 |