Power Window Main Switch Inspection

Disconnect the Negative (-) Battery Terminal.
Remove the Front Door Trim Panel.
(Refer to "FRONT DOOR TRIM REPLACEMENT ")
Disconnect the connector from the switch.

Fig 1: Power Window Main Switch Connector Terminals
Courtesy of KIA MOTORS AMERICA, INC.
Check for continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.

Fig 2: Power Window Main Switch Terminal Continuity Chart (1 Of 2)

Courtesy of KIA MOTORS AMERICA, INC.

Fig 3: Power Window Main Switch Terminal Continuity Chart (2 Of 2)

Courtesy of KIA MOTORS AMERICA, INC.