LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2017 >> Rio SX >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System >> Fuel Pump >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Release the residual pressure in fuel line (Refer to the Fuel Delivery System - REPAIR PROCEDURES - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ").
  2. Remove the rear seat [LH] (Refer to "REAR SEAT ").
  3. Remove the fuel pump service cover (A).
    Fig 1: Removing Fuel Pump Service Cover
    G11845312Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the fuel pump connector (A).
  5. Disconnect the fuel feed tube quick connector (B).
  6. Disconnect the fuel tank pressure sensor connector (C).
  7. Disconnect the vapor tube quick-connector (D).
  8. Remove the plate cover (E) after removing the installation bolts, and then remove the fuel pump from the fuel tank.
Fig 2: Disconnecting Vapor Tube Quick-Connector
G11845313Courtesy of KIA MOTORS AMERICA, INC.
Fig 3: Identifying Fuel Pump
G11845314Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals