Adjusting Procedure For Lock Cam And Shift Lock Cable

1. Shift lock cable must be fixed to brake pedal (brake pedal must not be pressed down), and at lever (shift lever) must be "N" position
2. Shift lock cable must be assembled to at lever (shift lever) assembly as shown in illustration Fig 1 cable end must be inserted into fixing pin (A) of lock cam securely.
3. Maintain close adhesion lock cam (E) and lock cam stopper (D) slightly pull outer casing of shift lock cable (E) in direction "E" to remove slack of shift lock cable (E).
4. After checking that cable end is touched to cable fixing pin of lock cam, fix adjust plate.
5. Check that cable end (B) is touched to cable fixing pin of lock cam (A).

Fig 1: Locating Fixing Pin

Courtesy of KIA MOTORS AMERICA, INC.