Shift Lever Assembly Replacement

Remove the center console.
(Refer to "INTERIOR (CONSOLE) " )
Disconnect the connector (A)
Remove the control cable (B).

Fig 1: Disconnecting Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the shift lock cable (A).
Tightening Torque:

9.8-14.7 N.m (1.0-1.5 kgf.m, 7.2-10.8 lb-ft)

Fig 2: Locating Shift Lock Cable
Courtesy of KIA MOTORS AMERICA, INC.
Remove the wiring clip (A).
Remove the AT lever (shift lever) assembly (B) by removing the bolts (4ea).
Tightening Torque:

8.8-13.7 N.m (0.9-1.4 kgf.m, 6.5-10.1 lb-ft)

Fig 3: Removing Wiring Clip
Courtesy of KIA MOTORS AMERICA, INC.
Installation is the reverse of removal.
NOTE: Adjust the shift lock cable.
(Refer to "Adjusting Procedure For Lock Cam And Shift Lock Cable" )