LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2017 >> Sedona EX >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> CVVT Oil Control Valve (OCV) >> Repair Procedures >> Removal >> [Bank 1/Intake]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

[Bank 1/Intake]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the intake manifold.

    (Refer to Engine Mechanical System - "INTAKE MANIFOLD ")

  3. Disconnect the CVVT oil control valve connector (A).
  4. Remove the installation bolt (B), and then remove the valve from the engine.
    Fig 1: Locating CVVT Oil Control Valve Connector And Installation Bolt
    G12274678Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals