LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2017 >> Sedona EX >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Camshaft Position Sensor (CMPS) >> Repair Procedures >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Installation

NOTE:
  • Install the component to the specified torques.
  • Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
  • Apply the engine oil to the O-ring.
  • Insert the sensor in the installation hole and be careful not to damage sensor when installing.
  • Be careful not to damage the sensor housing and the connector.
  • Be careful not to damage the O-ring.
  1. Install in the reverse order of removal.

    Camshaft position sensor mounting bolt: 

    6.9 ~ 9.8 N.m (0.7 ~ 1.0 kgf.m, 5.1 ~ 7.2 lb-ft)

scientia non olet · About LEMON Manuals