LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2017 >> Sedona EX >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Knock Sensor (KS) >> Repair Procedures >> Removal >> [Bank 1]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

[Bank 1]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the intake manifold.

    (Refer to Engine Mechanical System - "INTAKE MANIFOLD ")

  3. Remove the delivery pipe.

    (Refer to Fuel Delivery System - "DELIVERY PIPE ")

  4. Remove the mounting bolt (A), and then remove the sensor from the cylinder block.
    Fig 1: Locating Knock Sensor Mounting Bolt (Bank 1)
    G12274630Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals