Repair Procedures: Inspection
- Connect the GDS on the Data Link Connector (DLC).
- Measure the output voltage of the BPS at idle and IG ON.
| Pressure [kPa (kgf/cm2
, psi)] |
Output Voltage (V) [Ref=5V] |
| 10.0 (0.01, 0.15) |
0.50 |
| 55.0 (0.56, 7.98) |
2.21 |
| 115.0 (1.17, 16.9) |
4.50 |