LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2017 >> Sorento L >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.4L >> Camshaft Position Sensor (CMPS) >> Repair Procedures >> Removal >> [Bank 1/Exhaust]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

[Bank 1/Exhaust]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the engine hanger & camshaft position sensor protector after loosening the mounting bolt (B).
  4. Remove the mounting bolt (C), and then remove the sensor.
    Fig 1: Disconnecting Camshaft Position Sensor Connector
    G12180225Courtesy of KIA MOTORS AMERICA, INC.
    NOTE: When installing the sensor connector be sure to keep the wiring clip position (A).
    Fig 2: Locating Sensor Connector To Wiring Clip Position
    G12180226Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals