Repair Procedures: Removal

Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
Remove the second row seat.
(Refer to Body - "REAR SEAT ")
Remove the rear seat LH air duct (A) after loosening the mounting nuts.

Fig 1: Removing Rear Seat LH Air Duct
Courtesy of KIA MOTORS AMERICA, INC.
Remove the seat cable bracket (A) after loosening the mounting nuts.

Fig 2: Removing Seat Cable Bracket
Courtesy of KIA MOTORS AMERICA, INC.
Remove the fuel pump service cover (A) after loosening the mounting screws.

Fig 3: Removing Fuel Pump Service Cover
Courtesy of KIA MOTORS AMERICA, INC.
Remove the fuel tank pressure sensor (A) after disconnect the connector (B).

Fig 4: Removing Fuel Tank Pressure Sensor
Courtesy of KIA MOTORS AMERICA, INC.