Repair Procedures: Removal

Place the shift lever into the "N" position.
Remove the air duct and the air cleaner assembly.
(Refer to Engine Mechanical System - "AIR CLEANER ")
Remove the battery and battery tray.
(Refer to Engine Electrical System - "BATTERY ")
Disconnect the inhibitor switch connector (A) and loosen the shift cable mounting nut (B).

Fig 1: Disconnecting Inhibitor Switch Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the manual control lever (B) and the washer after removing a nut (A).

Fig 2: Removing Manual Control Lever And Washer
Courtesy of KIA MOTORS AMERICA, INC.
Remove the inhibitor switch (A) after loosening the bolts.

Fig 3: Removing Inhibitor Switch
Courtesy of KIA MOTORS AMERICA, INC.